Equipment Rental
Benefit from Y.I.C. Technologies Rental Program
USA-based prospects have the opportunity to try out our EMScanner with its own internal spectrum analyzer on a monthly basis.
EMScannerR Product Features
Capability:
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation and notes.
Spatial scan time:
Continuous real-time for entire scan area (1,218 probes activated) when Level 1 selected: 5 sec.
Selected area 2.25 cm x 2.25 cm, 9 probes activated.
Level 1: <0.5 sec. | Level 2: 4 sec. | Level 3: 9 sec. | Level 4: 21 sec. | Level 5: 55 sec. | Level 6: 2 min 35 sec. | Level 7: 7 min 23 sec. | Level 8: 24 min 00 sec.
Spectral scan time:
11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span and RBW are user selectable within spectrum analyser specifications
Supported operating systems:
Windows 10®
Supported overlays:
Picture in JPEG format
Standard Gerber© RS274x format and HPGL format CAD files
EMScannerR Specifications
Broadband frequency coverage:
Base configuration = 150 kHz to 8 GHz
Antenna array:
1,218 (42 x 29) H-field probes.
Spatial resolution:
Level 1: 7.50 mm | Level 2: 3.75 mm | Level 3: 1.88 mm | Level 4: 0.94 mm
Level 5: 0.47 mm | level 6: 0.24 mm | Level 7: 0.12 mm | Level 8: 0.06 mm
Scan area:
L 31.6 cm x W 21.8 cm (L 12.44” x W 8.58”)
Frequency accuracy of peaks:
Peak marking accuracy of the spectrum analyzer
Probe to probe uniformity:
Calibrated before shipment. Firmware correction factors adjust for frequency-dependent probe responses with +/- 3 dB accuracy
Measurement plane isolation:
> 20 dB
Maximum radiated power load:
10 W / 40 dBm
Enclosure:
Anodized non-conductive metal
Maximum DUT voltage:
Glass Cover: 4kV DC; 2.6kV AC | Metal Case: 260V DC; 200V AC (measured as dielectric withstanding voltage – DWV)
Operating temperature:
From 15⁰ C to 40⁰ C
Fuse Rating:
8A
Scanner connections:
Spectrum analyzer: RF SMA to type N coaxial cable | Adapter: Proprietary DB25
Supported Analyzers (If your analyzer is not listed contact Y.I.C. Technologies for driver development)
Keysight: N9000A-CXA, N9000B-CXA, N9010A-EXA, N9010B-EXA, N9020B-MXA, N9020A-MXA, N9038A-MXE, N9912A-FieldFox, N9916A-FieldFox, N9918A-FieldFox, N9952A-FieldFox, E4440A-PSA, N9030A-PXA, N9040B-UXA
Rohde & Schwarz: ZVL, ZVB20, ZNB8, FSW, FSV4, FSV3, FPL
Dimensions of the scanner:
L 34.5 cm x W 43.5 cm x H 11 cm (L 13.58” x W 17.13” x H 4.33”)
Weight:
12.70 Kg / 28 lb (including cables and the adapter)
Resources
To view and/or download EMScanner resources, simply click on the links below:
Complete with software to run on your own pc you will quickly see where your EMC issues lie, whether it’s from PCBs, leakage from poor enclosure design or cable harnesses . This high resolution (0.06 mm) scanner can pin point the emission to track and component level to give you confidence that your products will pass the relevant EMC radiated standards .
World’s fastest EMC/EMI diagnostic system has been reinvented to assist high density board designers to visualize the root causes of potential EMC and EMI problems during pre- and post EMC compliance testing.
Please get in touch for a quotation and availability.
Owen Wiseman
239-691-6117
EMScannerR provides unique pre- and post-EMC compliance testing that images emissions. During any new PCB development process, design engineers must find, characterize, and address unintended radiators or RF leakage to pass compliance testing. EMScannerR allows board designers to pre-test and resolve EMC and EMI problems early on, thus avoiding unexpected EMC compliance test results.
SCANNER USERS
